Mould and Core Dressings (Alcohol base)

Acme products include a number of dressings in the form of Powder, Paste, Semi Paste and Ready to Use applications. These dressings are based on high quality refractory material and are blended with sophisticated binders and suspension agents to give an excellent application properties, suspension characteristics and optimum penetration properties.

MP–25L IP: This product is a Zircon based coating with excellent suspension and coverage properties. Product is specially formulated to ensure high refractory, non-meltable and non-reactive coating layer with optimum application properties to ensure an excellent coating finish.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP25L IP Liquid Zircon / Spirit Colour Green Apply by brush / swabmethod and ignite 30 Kg. Bucket
Sp. Gr 1.60 – 1.62
Baume 60 – 64 Deg
Viscosity 15 – 18 Sec.
MP25L IP(F) Liquid Zircon / Spirit Colour Green Apply by brush / swab method and ignite 30 Kg. Bucket
Sp. Gr 1.47 – 1.51
Baume 48 – 52 Deg
Viscosity 14 – 15 Sec
MP25L IP(RFU) Liquid Zircon / Spirit Colour Blue / Green Apply by brush / swab method and ignite 30 Kg. Bucket

35 Kg. Carboy

Sp. Gr. 1.55 – 1.57
Baume 54 – 55 Deg
Viscosity 15 – 17 Sec

MP–100 IP: This is a Zircon based, high solids, thixotropic coating with excellent suspension properties and easily re-mixable manually. This coating is suitable for resinous binder backgrounds and gives very good surface finish. This coating has a higher filler content, which gives better surface coverage per Kg. of wash as compared to normal coatings. Due to high gel strength, spirit seepage in to the moulds and cores is reduced and hence chances of surface weakening is also reduced. This coating is therefore suitable for organic binder backgrounds. Organic content of M.P 100 is much less than other coatings hence generating lower gas.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP100 IP Paste Zircon / Spirit Colour Off white Apply by brush after dilution with MP101 & ignite 40 Kg. Bucket

50 Kg. Carboy

Sp. Gr. 2.0 – 2.2

MP–26L: This is a general purpose ready to use Zircon based coating suitable for heavy iron, copper and steel castings. Due to its high refractoriness it prevents sand fusion and metal penetration at high pouring temperatures. Although generally used for steel castings it is recommended for integral cores surrounded by molten metal even for cast iron castings.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP26L Liquid Zircon / Spirit Colour Off white Apply by brush / swab method and ignite 30 Kg. Bucket

35 Kg. Carboy

Sp. Gr 1.55 + 0.02
Viscosity 16 – 18 Sec

MP–26 P: This is Zircon based MP-26L coating supplied in paste form, to be used after mixing with MP- 101.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP26 Paste Paste Zircon / Spirit Colour Off white Apply by brush after dilution with MP101 & ignite 50 Kg. Carboy
Dilution rate 2 : 1 (Pr : Al)

MP–21L: This is a ready to use Graphite coating which can be applied to moulds and cores by spraying, swabbing or dipping. This is a general purpose coating for all types of Iron, Aluminium and Copper based Alloys. Being Alcohol / Spirit base they are particularly suitable for Sodium Silicate bonded moulds and cores for which water base dressings cannot be used.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP21L Liquid Graphite / Spirit Colour Black Apply by brush / dip / swab method and ignite 20 Kg. Bucket

50 Kg. Carboy

Sp. Gr 0.94+ 0.01
Viscosity 12 – 13 Sec
Settling rate 26% / hr
MP21L(1) Liquid Graphite / Spirit Colour Black Apply by brush / swab method and ignite 20 Kg. Bucket

50 Kg. Carboy

Sp. Gr 1.02 + 0.02
Viscosity 14 – 17 Sec
Settling rate 5% per hr.
MP21L1(xx) Liquid Graphite / Spirit Colour Black Apply by brush / swab method and ignite 20 Kg. Bucket

50 Kg. Carboy

Sp. Gr 1.02 + 0.02
Viscosity 11 – 13 Sec
Settling rate 10% per hr.

MP–21 Paste: This Graphite based coating in paste form to be used after diluting with MP-101.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP21 Paste Paste Graphite / Spirit Colour Black Apply by brush after dilution with MP101 & ignite 50 Kg. Carboy
Sp. Gr. 1.35 – 1.40
Dilution rate 2 : 1 (Pr : Al)
Settling rate 5% + 2%

Mouldex: This is Graphite based coating in powder form to be used after mixing with MP-101.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

Mouldex Powder Graphite Colour Black Apply by brush after dilution with MP101 & ignite 25 Kg. Bag

MP–31L: This is a spirit based ready to use Magnesite Coating which eliminates metal mold reaction on Manganese Steel Coating and gives excellent casting finish free from sand burns and fusion.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP31L Liquid Magn esite / Spirit Colour Off white Apply by brush / swab method and ignite 30 Kg. Bucket

35 Kg. Carboy

Sp. Gr. 1.35 – 1.4
Viscosity 14 – 15 Sec
Settling rate 5% per hr.

MP–20Z: This is an Aluminium Silicate based product in liquid form with excellent suspension characteristic for Cast Iron application in Ready to Use form.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP20 (Z) Liquid Alumina Silicate Colour Alumina Silicate Ready to Use 25 Kg. Carboy
Sp. Gr. 1.09 – 1.11
Viscosity 10 – 13 Sec.
Settling rate Nil

MP–101: This is Alcohol based general thinner used for blending with paste and powder form of coatings.

Product Name

Form

Filler / Carrier

Physical properties

Application details / method

Packing

MP101 Liquid Spirit Colour Pale yellow Colour-less To be mixed with Mould
Paint to get a particular viscosity
applicable for coating on mould and cores
205 Ltr. Barrel
Sp. Gr. 0.78 – 0.81

Download Brochure